To support the launch of the new generation of Intel CPU’s Cooler Master has provided Hyper TX3 and Hyper 212 Plus coolers to Intel EMEA to be used as a part Intel sample package.
Tag Archives: i7
Cooler Master Hyper N520 CPU Cooler Review
September 4, 2009 – 2:18 pm
With the tower format cooler generally accepted as the best current heatsink design architecture, the variations are often with the base, heatpipes and fan configurations. Previous Cooler Master designs such as the V8 and V10 are pretty extreme with additional heatsinks sprouting from all parts making them into monster coolers.
Although this cooler may resemble a basic heatpipe cooler, CM has gone down a different route in making it unique. The Hyper N520 not only has a dual fan configuration but the fans are also slightly offset supposedly to ensure the air is “accelerated” through heatsink. So where about does this cooler fit into Cooler Master’s ranges?
Well, the V8 and V10 coolers are very high end and with specific coolers such as the Hyper TX3 for the new Intel i5 processors, Cooler Master appear to have slotted the N520 into the all round category with it being compatible with an array of different processors. Enough said for the moment, let’s take a better look at the product in question before unleashing it on our test rig.
Evercool HPK-10025EA Review
September 1, 2009 – 5:39 pm
Evercool, a company which specialise in the cooling market, provide our latest CPU cooler sample to pit it wits against our i7 rig. The cooler in question with its low profile architecture is designed to suit HTPCs and small cases. Named the HPK-10025EA, this cooler is solely Intel orientated for both LGA775 and LGA1366 sockets but how well can it contend with the high 130W TDP of the i7 920 processor.
Many larger designs have come unstuck so how will the HPK-10025EA fare? Let’s take a look…
Cooler Master V8 Review
August 9, 2009 – 10:07 pm
Recently we’ve been taking a look at some pretty high end CPU coolers which, despite the different fin configurations and heatpipe layouts, are all reasonably similar. The Cooler Master V8, which we are to take a look at in this review, is a litter different in that although it is based on a tower format design it has added heatsinks on both sides and a centrally mounted fan.
The V8 appears to be somewhat of a brute as CPU coolers go with its fiery red LEDs and countless heatpipes massing together at its base. Our i7 test rig has put to shame many a cooler in the past, so how will the V8 fare? Let’s find out…
OCZ Gladiator Max Review
July 5, 2009 – 9:28 pm
With the introduction of Intel’s latest range of processors – the i7 series – thermal solutions manufacturers have been caught between two minds: to create a new cooler which is better able to counter the 130W TDP of these new processors or to create a mounting mechanism for an existing CPU cooler in their range to allow it to fit the LGA1366 motherboards.
OCZ took the decision to do the later and created the Force II support brackets for the Gladiator Max. The cooler follows popular tower format design utilises a single 120mm fan but will this be enough cooling for the high heat-producing i7 920? Let’s find out…